DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.797 INCHES NOMINAL |
BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.156 INCHES NOMINAL |
CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 900.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM CURRENT RATING IN AMPS | 135.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 1250.0 SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT POSITION ARRANGEMENT STYLE | 18-6 SINGLE MATING END |
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TY 1,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.156 INCHES NOMINAL |
ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND SALT WATER RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END SINGLE CONTACT GROUPING |
INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
INSERT MATERIAL | PLASTIC SINGLE MATING END |
INSERT POSITION IN DEG | 0.0 |
OPERATING TEMP RATING | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
OVERALL HEIGHT | 1.500 INCHES NOMINAL |
OVERALL LENGTH | 1.576 INCHES NOMINAL |
OVERALL WIDTH | 1.500 INCHES NOMINAL |
MATING END QUANTITY | 1 |
NOMINAL THREAD SIZE | 1.250 INCHES |
POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
PRECIOUS MATERIAL | GOLD |
PRECIOUS MATERIAL AND WEIGHT | 0.005 GOLD GRAINS, TROY |
SHELL MATERIAL | ALUMINUM ALLOY |
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 FED SPEC 1ST TREATMENT RESPONSE AND QQ-P-416,TY 2 FED SPEC 2ND TREATMENT RESPONSE |
SHELL SURFACE TREATMENT | CADMIUM AND NICKEL |
SHELL TYPE | SOLID |
UNTHREADED MOUNTING HOLE DIAMETER | 0.177 INCHES NOMINAL |
SPECIFICATION/STANDARD DATA | 96906-MS17346 GOVERNMENT STANDARD |
TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
TEST DATA DOCUMENT | 81349-MIL-C-22992 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
THREAD CLASS | 2A |
THREAD DIRECTION | RIGHT-HAND |
THREAD SERIES DESIGNATOR | DOUBLE STUB |
THREAD QUANTITY PER INCH | 10 |
THREADED DEVICE TYPE | COUPLING FACILITY |