5935-01-371-1725, CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-371-1725

Federal Supply Class:
5935

National Item Identification Number:
013711725

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

MIL-C-26482	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MIL-DTL-26482	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS3110E10-98S	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.431 INCHES MINIMUM AND 0.462 INCHES MAXIMUM
BODY STYLE	STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	0.719 INCHES NOMINAL
CONNECTOR LOCKING METHOD	BAYONET PIN
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT REMOVABILITY	NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	10-98 SINGLE MATING END
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	0.719 INCHES NOMINAL
ENVIRONMENTAL PROTECTION	MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND THERMAL SHOCK RESISTANT AND CORROSION RESISTANT
INCLUDED CONTACT QUANTITY	6 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL	PLASTIC SINGLE MATING END
INSERT POSITION IN DEG	0.0
OPERATING TEMP RATING	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM
OVERALL HEIGHT	0.954 INCHES MAXIMUM
OVERALL LENGTH	1.328 INCHES MAXIMUM
OVERALL WIDTH	0.954 INCHES MAXIMUM
MATING END QUANTITY	1
POLARIZATION METHOD	KEYWAY OR MULTIPLE KEYWAY
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PRECIOUS MATERIAL	GOLD
PRECIOUS MATERIAL AND WEIGHT	0.030 GOLD GRAINS, TROY
SHELL MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-591 FED SPEC SINGLE MATERIAL RESPONSE
SHELL MATERIAL	ALUMINUM ALLOY
SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES
SHELL SURFACE TREATMENT	CADMIUM AND CHROMATE
SHELL TYPE	SOLID
UNTHREADED MOUNTING HOLE DIAMETER	0.120 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
SPECIFICATION/STANDARD DATA	96906-MS3110 GOVERNMENT STANDARD
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING
TEST DATA DOCUMENT	81349-MIL-C-26482 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).

Click here to Register for Free 30-day Trial