5935-01-458-1676, CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-458-1676

Federal Supply Class:
5935

National Item Identification Number:
014581676

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.

Manufacturer Information:

MIL-C-5015	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS3402D22-7EY	0U583	SAE INTERNATIONAL
MS3402D22-7EY	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
PL275838-102 FN 23	06481	NORTHROP GRUMMAN SYSTEMS CORPORATION
PL275838-102 FN 23	13973	LITTON SYSTEMS INC. DIV NAVIGATION SYSTEMS DIVISION
SAE-AS50151	0U583	SAE INTERNATIONAL

Techincal Specification:

DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE	0.750 INCHES MINIMUM AND 0.781 INCHES MAXIMUM
BODY STYLE	STRAIGHT SHAPE, EXTERNAL COUPLING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT	1.250 INCHES NOMINAL
CONNECTOR LOCKING METHOD	EXTERNALLY THREADED SHELL
CONTACT MATERIAL	COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLE	22-7 SINGLE MATING END
CONTACT REMOVABILITY	REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT	GOLD SINGLE MATING END SINGLE CONTACT GROUPING
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH	1.250 INCHES NOMINAL
ENVIRONMENTAL PROTECTION	MOISTURE PROOF AND VIBRATION RESISTANT AND SALT WATER RESISTANT
INCLUDED CONTACT QUANTITY	1 SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPE	ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING
INSERT MATERIAL	PLASTIC SILICONE MINERAL FILLED SINGLE MATING END
OVERALL HEIGHT	1.625 INCHES NOMINAL
OVERALL LENGTH	1.937 INCHES MAXIMUM
OVERALL WIDTH	1.625 INCHES NOMINAL
MATING END QUANTITY	1
NOMINAL THREAD LENGTH	0.625 INCHES
NOMINAL THREAD SIZE	1.375 INCHES
SPECIAL FEATURES	16-22 WIRE SIZE SOCKET CONTACTS IN LIEU OF 16-16
PRECIOUS MATERIAL AND LOCATION	CONTACT SURFACES GOLD
PRECIOUS MATERIAL	GOLD
SHELL MATERIAL	ALUMINUM ALLOY
SHELL SURFACE TREATMENT	CADMIUM
SHELL TYPE	SOLID
TERMINAL LOCATION	BACK SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPE	CRIMP SINGLE MATING END SINGLE CONTACT GROUPING
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	18
THREADED DEVICE TYPE	COUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER	0.115 INCHES MINIMUM AND 0.130 INCHES MAXIMUM

Click here to Register for Free 30-day Trial