| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 0.900 INCHES NOMINAL 1ST MOUNTING FACILITY ALL CENTER GROUPINGS |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 0.900 INCHES NOMINAL 2ND MOUNTING FACILITY 1ST CENTER GROUP |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 0.900 INCHES NOMINAL 2ND MOUNTING FACILITY 2ND CENTER GROUP |
| BODY HEIGHT | 1.250 INCHES NOMINAL |
| BODY LENGTH | 2.450 INCHES MAXIMUM |
| BODY WIDTH | 2.170 INCHES NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.500 INCHES NOMINAL 2ND MOUNTING FACILITY SINGLE CENTER GROUP |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.900 INCHES NOMINAL ALL MOUNTING FACILITIES ALL CENTER GROUPINGS |
| DC RESISTANCE RATING IN OHMS | 0.030 SINGLE COMPONENT SINGLE SECONDARY |
| DC RESISTANCE RATING IN OHMS | 0.240 SINGLE COMPONENT SINGLE PRIMARY |
| INCLOSURE TYPE | FULLY INCLOSED |
| INDUCTANCE RATING | 1.20 MILLIHENRIES MINIMUM SINGLE COMPONENT SINGLE PRIMARY |
| INDUCTANCE TYPE | FIXED |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY QUANTITY | 6 ALL GROUPINGS |
| MOUNTING METHOD | THREADED HOLE ALL GROUPINGS |
| NOMINAL THREAD SIZE | 0.138 INCHES ALL GROUPINGS |
| RATING METHOD | ELECTRICAL SINGLE COMPONENT ALL WINDING |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| WINDING OPERATING CURRENT | 10.0 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE SECONDARY |
| WINDING OPERATING CURRENT | 4.0 AMPERES DC MAXIMUM SINGLE COMPONENT SINGLE PRIMARY |
| WINDING QUANTITY | 2 SINGLE COMPONENT |
| TERMINAL TYPE AND QUANTITY | 4 TURRET |
| TEST DATA DOCUMENT | 06481-905981 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD SERIES DESIGNATOR | UNC ALL GROUPINGS |