|
|
|
National Stock Number:
5955-00-004-7633
Federal Supply Class:
5955
National Item Identification Number:
000047633
Description:
CRYSTAL UNIT,QUARTZ
Detail:
An item which consists of a quartz crystal resonator(s), suitably mounted in a HOLDER, QUARTZ CRYSTAL.
|
Manufacturer Information:
| CR-50A/U26.900KHZ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CR50A/U26K90000 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | CR50AU | 03040 | POWER CONTROL DEVICES, INC. | | CR50AU | 09747 | POWER CONTROL DEVICES INC | | CR50AU26-9KHZ | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-3098/28 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MILC3098-28 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DRIVE LEVEL RATING | 0.1 MILLIWATTS NOMINAL | | BODY LENGTH | 1.526 INCHES MAXIMUM | | BODY WIDTH | 0.725 INCHES MAXIMUM | | BODY THICKNESS | 0.317 INCHES MAXIMUM | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.478 INCHES MINIMUM AND 0.494 INCHES MAXIMUM | | CIRCUIT RESONANCE | SERIES RESONANCE | | EQUIVALENT RESISTANCE VALUE IN OHMS | 100000.0 NOMINAL | | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.012 TO 0.012 | | OPERATING TEMP RANGE | -40.0 TO 70.0 CELSIUS | | OVERALL LENGTH | 1.774 INCHES MAXIMUM | | OVERALL THICKNESS | 0.352 INCHES MAXIMUM | | OVERALL WIDTH | 0.757 INCHES MAXIMUM | | MODE OF OSCILLATION | FUNDAMENTAL | | SHUNT CAPACITANCE IN PICOFARADS | 6.4 MAXIMUM | | SPECIFIED FREQUENCY | 26.900 KILOHERTZ | | STYLE DESIGNATOR | OVAL BODY, PIN TERMINALS | | TERMINAL LENGTH | 0.223 INCHES MINIMUM AND 0.248 INCHES MAXIMUM | | TERMINAL DIAMETER | 0.048 INCHES MINIMUM AND 0.052 INCHES MAXIMUM | | TEST DATA DOCUMENT | 81349-MILC3098 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|