|
|
|
National Stock Number:
5962-01-368-5337
Federal Supply Class:
5962
National Item Identification Number:
013685337
Description:
MICROCIRCUIT,LINEAR
Detail:
A MICROCIRCUIT WHOSE OUTPUT IS A FUNCTION OF THE INPUT; THAT IS, THE OUTPUT VARIES IN A PREDETERMINED AND ESSENTIALLY PREDICTABLE MANNER FROM THE INPUT SIGNAL.
|
Manufacturer Information:
| 205-0121-010 | 13499 | ROCKWELL COLLINS, INC. | | NHRC205-0121-010 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | RC205-0121-010 | 13499 | ROCKWELL COLLINS, INC. | | SP8600AC/CM | 53469 | MITEL SEMICONDUCTOR AMERICANS INC |
|
Techincal Specification:
| BODY LENGTH | 0.165 INCHES MINIMUM AND 0.185 INCHES MAXIMUM | | BODY WIDTH | 0.340 INCHES MINIMUM AND 0.370 INCHES MAXIMUM | | CASE OUTLINE SOURCE AND DESIGNATOR | TO-5 JOINT ELECTRON DEVICE ENGINEERING COUNCIL | | CRITICALITY CODE JUSTIFICATION | FEAT | | CURRENT RATING PER CHARACTERISTIC | 1.65 MILLIAMPERES MINIMUM OUTPUT AND 25.00 MILLIAMPERES MAXIMUM SUPPLY | | DESIGN FUNCTION AND QUANTITY | 2 TRIGGER, INTERFACE | | FEATURES PROVIDED | RADIATION HARDENED | | INCLOSURE CONFIGURATION | CAN | | INPUT CIRCUIT PATTERN | 2 INPUT | | NONDEFINITIVE SPEC/STD DATA | 010 NUMBER | | OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS | | PART NAME ASSIGNED BY CONTROLLING AGENCY | RESCREENED,MICROCIRCUIT,COUNTER | | SPECIAL FEATURES | HARDNESS CRITICAL ITEM | | SPECIAL TEST FEATURES | SELECTED AND RESCREENED FOR MILSTAR | | SPECIFICATION/STANDARD DATA | 95105-RC205-0121 MANUFACTURERS SOURCE CONTROL | | STORAGE TEMP RANGE | -55.0 TO 175.0 CELSIUS | | TERMINAL TYPE AND QUANTITY | 8 PRINTED CIRCUIT | | TEST DATA DOCUMENT | 95105-995-9501-020 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 81349-MIL-M-38510 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MIL-STD-883 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). AND 96906-DOD-STD-1686 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -10.0 VOLTS MAXIMUM APPLIED AND 14.0 VOLTS MAXIMUM POSITIVE OUTPUT |
|
|