|
|
|
National Stock Number:
5962-01-370-1449
Federal Supply Class:
5962
National Item Identification Number:
013701449
Description:
MICROCIRCUIT,DIGITAL
Detail:
A microcircuit specifically designed to generate, modify, or process electrical signals which operate with two distinct or binary states. These states are commonly referred to as on and off, true and false, high and low, or 1 and 0.
|
Manufacturer Information:
| 588R464H01 | 0HSW3 | ATMEL CORPORATION | | 588R464H01 | 63281 | LSI LOGIC CORP | | 588R464H01 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 81001300-NFST | 0HSW3 | ATMEL CORPORATION |
|
Techincal Specification:
| BODY HEIGHT | 1.520 INCHES MINIMUM AND 1.530 INCHES MAXIMUM | | BODY LENGTH | 1.520 INCHES MINIMUM AND 1.530 INCHES MAXIMUM | | BODY WIDTH | 0.074 INCHES MINIMUM AND 0.106 INCHES MAXIMUM | | CURRENT RATING PER CHARACTERISTIC | 200.00 MILLIAMPERES MAXIMUM OUTPUT SINK | | DESIGN FUNCTION AND QUANTITY | 1 ARRAY, LOGIC AND 1 ARITHMETIC LOGIC UNIT AND 1 MULTIPLIER AND 4 REGISTER, FILE MULTIPORT | | INCLOSURE CONFIGURATION | LEADED CHIP CARRIER | | INCLOSURE MATERIAL | GLASS | | OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS | | OUTPUT LOGIC FORM | COMPLEMENTARY-METAL OXIDE-SEMICONDUCTOR LOGIC AND TRANSISTOR-TRANSISTOR LOGIC | | NONDEFINITIVE SPEC/STD DATA | 01 NUMBER | | PART NAME ASSIGNED BY CONTROLLING AGENCY | MICROCIRCUIT,DIGITAL,VHSIC,CONFIGURABLE GATE ARRAY,ISPE | | PRECIOUS MATERIAL AND LOCATION | DIE SILVER AND ALL EXPOSED METALIZED AREAS GOLD | | PRECIOUS MATERIAL | SILVER AND GOLD | | SPECIAL FEATURES | POWER SUPPLY BY-PASS CAPACITORS TO BE MOUNTED ON PACKAGE PER 3.4.3 OF DRAWING | | VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -0.3 VOLTS MINIMUM TOTAL SUPPLY AND 7.0 VOLTS MAXIMUM TOTAL SUPPLY | | SPECIFICATION/STANDARD DATA | 97942-588R464H MANUFACTURERS SOURCE CONTROL | | STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS | | TERMINAL TYPE AND QUANTITY | 224 PRINTED CIRCUIT | | TERMINAL SURFACE TREATMENT | GOLD | | TEST DATA DOCUMENT | 81349-MIL-M-38510 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MIL-STD-883 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). AND 81349-DOD-D-1000 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) AND 97942-S000925 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) AND 97942-S000926 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) AND 8+744-JEDEC STANDARD NO. 17 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|