| CAPITANCE RATING PER CHARACTERISTIC | 10.00 INPUT PICOFARADS MAXIMUM AND 10.00 OUTPUT PICOFARADS MAXIMUM |
| CASE OUTLINE SOURCE AND DESIGNATOR | D-10 MIL-M-38510 |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| DEPARTURE FROM CITED DESIGNATOR | ALTERED BY PROGRAMMING,TESTING & MARKING |
| FEATURES PROVIDED | ELECTRICALLY ALTERABLE AND PROGRAMMED AND MONOLITHIC |
| HYBRID TECHNOLOGY TYPE | MONOLITHIC |
| INCLOSURE CONFIGURATION | DUAL-IN-LINE |
| INCLOSURE MATERIAL | CERAMIC |
| OPERATING TEMP RANGE | -55.0 TO 125.0 CELSIUS |
| OUTPUT LOGIC FORM | COMPLEMENTARY-METAL OXIDE-SEMICONDUCTOR LOGIC |
| MAXIMUM POWER DISSIPATION RATING | 1.0 WATTS |
| MEMORY DEVICE TYPE | EEPROM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | MICROCIRCUIT,DIGITAL,CMOS 8K X 8 EEPROM,MONOLITHIC SILICON |
| SPECIAL FEATURES | NUCLEAR HARDNESS CRITICAL ITEM |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | -0.3 VOLTS MINIMUM ABSOLUTE INPUT AND 6.25 VOLTS MAXIMUM ABSOLUTE INPUT |
| SPECIFICATION/STANDARD DATA | 88818-A584C206-251 MANUFACTURERS SPECIFICATION CONTROL AND 67268-5962-8751403XA GOVERNMENT STANDARD |
| STORAGE TEMP RANGE | -65.0 TO 150.0 CELSIUS |
| TERMINAL TYPE AND QUANTITY | 28 PRINTED CIRCUIT |
| TERMINAL SURFACE TREATMENT | SOLDER |
| TEST DATA DOCUMENT | 81349-MIL-M-38510 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MIL-STD-883 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). AND 96906-MIL-STD-1686 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). AND 88818-Y179A240 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| TIME RATING PER CHACTERISTIC | 250.00 NANOSECONDS NOMINAL ACCESS |