| ADJUSTMENT DEVICE TYPE AND QUANTITY | 1 SHAFT AND 1 KNOB W/DIAL |
| APPLICATION DESIGN | TRANSMISSION LINE |
| ATTENUATION PER STEP IN DECIBELS | 10.0 |
| ATTENUATION VARIATION METHOD | STEPPED |
| BODY STYLE | COAXIAL TYPE |
| COAXIAL CONNECTOR SERIES DESIGNATION | SMA |
| FREQUENCY RANGE | 0.000 GIGAHERTZ MINIMUM AND 2.000 GIGAHERTZ MAXIMUM |
| IMPEDANCE RATING IN OHMS | 50.0 INPUT-OUTPUT |
| INSERTION LOSS AT MINIMUM ATTENUATION IN MAXIMUM DECIBELS | 0.2 |
| OVERALL ATTENUATION ACCURACY IN DECIBELS | -1.60 TO 1.60 |
| OVERALL ATTENUATION RANGE IN DECIBELS | +0.0 TO 100.0 |
| OVERALL HEIGHT | 2.120 INCHES NOMINAL |
| OVERALL LENGTH | 3.220 INCHES NOMINAL |
| OVERALL WIDTH | 1.310 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE |
| MOUNTING FACILITY NOMINAL SCREW THREAD DIAMETER | 0.138 INCHES |
| MOUNTING FACILITY PATTERN | FOUR POSITION DIAMOND |
| MOUNTING FACILITY SCREW THREAD SERIES DESIGNATOR | UNC |
| MOUNTING THREAD QUANTITY | 32 PER INCH |
| OPERATING TEMP RANGE | -55.0 TO 85.0 CELSIUS |
| POWER RATING | 3.0 WATTS AVERAGE AND 1000.0 WATTS PEAK |
| SEGMENT ATTENUATION RANGE IN DECIBELS | +0.00 TO 10.00 AND +10.00 TO 20.00 AND +20.00 TO 30.00 AND +30.00 TO 40.00 AND +40.00 TO 50.00 AND +50.00 TO 60.00 AND +60.00 TO 70.00 AND +70.00 TO 80.00 AND +80.00 TO 90.00 AND +90.00 TO 100.00 |
| SEGMENT ATTENUATION ACCURACY IN DECIBELS | -0.30 TO 0.30 AND -0.50 TO 0.50 AND -0.70 TO 0.70 AND -0.80 TO 0.80 AND -1.00 TO 1.00 AND -1.20 TO 1.20 AND -1.30 TO 1.30 AND -1.40 TO 1.40 AND -1.50 TO 1.50 AND -1.60 TO 1.60 |
| SHAFT DIAMETER | 0.250 INCHES NOMINAL |
| SHAFT LENGTH | 0.620 INCHES NOMINAL |
| SHAFT TYPE | ROUND |
| SPECIAL FEATURES | MAX 0.250 IN. MOUNTING PANEL THICKNESS; 30 DEG ANGLE BETWEEN STEPS; FINISH IS CHEMICAL FILM OVER ALUMINUM PER MIL-C-5541; COLOR CLEAR |
| STEP POSITION QUANTITY | 10 |
| VOLTAGE STANDING WAVE RATIO | 1.30 |
| TERMINAL TYPE AND QUANTITY | 2 CONNECTOR, COAXIAL, MALE |