| ROTOR INPUT VOLTAGE RATING IN VOLTS | 115.0 NOMINAL |
| ROTOR INPUT CURRENT RATING | 52.0 MILLIAMPERES NOMINAL |
| ROTOR INPUT ELECTRICAL POWER RATING | 800.0 MILLIWATTS NOMINAL |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY SIZE | 11 |
| BODY MATERIAL | STEEL CORROSION RESISTING |
| ZRO RESISTANCE IN OHMS | 296.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 2190.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 170.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 1117.00 NOMINAL |
| ZRS RESISTANCE IN OHMS | 470.00 NOMINAL |
| PLUS J ZRS REACTANCE IN OHMS | 195.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 200.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 150.00 NOMINAL |
| TRANSFORMATION RATIO | 0.783 STATOR TO ROTOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 5.000 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TEMP RISE | 125.0 DEG CELSIUS |
| MAXIMUM FUNDAMENTAL NULL VOLTAGE IN MILLIVOLTS PER VOLT | 30.00 INPUT |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 94.00 |
| ELECTRICAL ERROR ANGULAR RANGE IN MINUTES | -7.0 TO 7.0 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 15.0 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.0 CENTIMETER-GRAMS NOMINAL |
| BODY STYLE | STANDARD ROUND B |
| SHOULDER DIAMETER | 0.9995 INCHES MINIMUM AND |
| 1.0000 INCHES MAXIMUM |
| PILOT DIAMETER | 0.6250 INCHES NOMINAL |
| OVERALL LENGTH | 2.0150 INCHES NOMINAL |
| FLANGE DIAMETER | 1.0590 INCHES MINIMUM AND |
| 1.0650 INCHES MAXIMUM |
| FLANGE THICKNESS | 0.0900 INCHES MINIMUM AND |
| 0.0960 INCHES MAXIMUM |
| UNDERCUT WIDTH | 0.0500 INCHES NOMINAL |
| PILOT LENGTH | 0.0590 INCHES MINIMUM AND |
| 0.0650 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.0590 INCHES MINIMUM AND |
| 0.0650 INCHES MAXIMUM |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.5750 INCHES MAXIMUM |
| ALIGNMENT HOLE DEPTH | 0.1250 INCHES NOMINAL |
| ALIGNMENT HOLE BOLT CIRCLE DIAMETER | 0.8090 INCHES MINIMUM AND |
| 0.8150 INCHES MAXIMUM |
| ALIGNMENT HOLE QUANTITY | 4 |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.1195 INCHES MINIMUM AND |
| 0.1200 INCHES MAXIMUM SINGLE SHAFT |
| SHAFT LENGTH | 0.3130 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0310 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |