| STATOR INPUT VOLTAGE RATING IN VOLTS | 26.00 NOMINAL |
| STATOR INPUT CURRENT RATING | 113.0 MILLIAMPERES MAXIMUM |
| STATOR INPUT ELECTRICAL POWER RATING | 0.54 WATTS NOMINAL |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| BODY STYLE | STANDARD ROUND A |
| FREQUENCY IN HERTZ | 400.0 NOMINAL |
| BODY SIZE | 8 |
| ZRO RESISTANCE IN OHMS | 54.00 NOMINAL |
| PLUS J ZRO REACTANCE IN OHMS | 260.00 NOMINAL |
| ZSO RESISTANCE IN OHMS | 12.00 NOMINAL |
| PLUS J ZSO REACTANCE IN OHMS | 45.00 NOMINAL |
| ROTOR DC RESISTANCE IN OHMS | 37.00 NOMINAL |
| STATOR DC RESISTANCE IN OHMS | 12.00 NOMINAL |
| TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.00 CENTIMETER-GRAMS NOMINAL |
| ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS NOMINAL |
| PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| OVERALL LENGTH | 1.6300 INCHES MAXIMUM |
| FLANGE DIAMETER | 0.7500 INCHES NOMINAL |
| FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| UNDERCUT DIAMETER | 0.6910 INCHES NOMINAL |
| UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| PILOT LENGTH | 0.0400 INCHES NOMINAL |
| MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| SHAFT TYPE | ROUND, SLOTTED SINGLE SHAFT |
| SHAFT DIAMETER | 0.0900 INCHES NOMINAL SINGLE SHAFT |
| SHAFT LENGTH | 0.4150 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| TERMINAL LOCATION | REAR |
| BODY MATERIAL | STEEL, STAINLESS |
| TEST DATA DOCUMENT | 96214-530500 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
| SHAFT END PLAY | 0.0005 INCHES MINIMUM AND |
| 0.0015 INCHES MAXIMUM |
| SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |