|
|
|
National Stock Number:
5999-00-011-4997
Federal Supply Class:
5999
National Item Identification Number:
000114997
Description:
DELAY LINE
Detail:
AN ITEM WHICH PROVIDES A PREDETERMINED DELAY TO AN ELECTRICAL PULSE, WHILE MAINTAINING SUBSTANTIALLY THE SAME WAVEFORM. THE DELAY IS OBTAINED BY MEANS OF A REAL OR ARTIFICIAL TRANSMISSION LINE OR EQUIVALENT DEVICE. THE EQUIVALENT DEVICE MAY BE ACOUSTIC, DISTRIBUTIVE, LUMPED CONSTANT, MAGNETIC SOLID STATE, OR SURFACE ACOUSTICAL WAVE TYPE. SEE ALSO ATTENUATOR, (AS MODIFIED); TRANSFORMER, (AS MODIFIED); AND OSCILLATOR, PULSE DELAY.
|
Manufacturer Information:
| 292014P1 | 94117 | BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. | | DL30A | 72259 | NYTRONICS INC | | J7965 | 72259 | NYTRONICS INC |
|
Techincal Specification:
| SIGNAL DELAY METHOD | LUMPED CONSTANT | | DELAY TIME VARIATION METHOD | VARIABLE | | INDIVIDUAL SECTION QUANTITY | 1 | | SECTION DELAY TIME | 300.000 MILLISECONDS NOMINAL SINGLE SECTION | | OPERATING TEMP RANGE | -55.0 TO 125.0 DEG CELSIUS | | DELAY TIME VARIATION PER DEG CELSIUS | 150.000 MICROSECONDS | | INPUT IMPEDANCE RATING | 1.000 KILOHMS | | OUTPUT IMPEDANCE RATING | 1.000 KILOHMS | | ATTENUATION IN DECIBELS | 0.540 | | VOLTAGE RATING | 600.000 VOLTS MAXIMUM | | PULSE RISE TIME RATING | 0.02 MICROSECONDS | | FREQUENCY BANDWIDTH | 18000.0 KILOHERTZ NOMINAL | | BODY STYLE | RECTANGULAR | | BODY LENGTH | 3.500 INCHES NOMINAL | | BODY WIDTH | 0.500 INCHES NOMINAL | | BODY DEPTH | 0.500 INCHES NOMINAL | | MATERIAL AND LOCATION | PLASTIC, EPOXY RESIN CASE | | SURFACE TREATMENT AND LOCATION | ANY ACCEPTABLE CASE | | TERMINAL TYPE AND QUANTITY | 3 WIRE HOOK | | MOUNTING FACILITY | UNTHREADED HOLE | | MOUNTING FACILITY QUANTITY | 2 | | HOLE DIAMETER | 0.187 INCHES NOMINAL | | MOUNTING PROVISION ARRANGEMENT STYLE | 2 POSITION IN-LINE | | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 3.187 INCHES NOMINAL | | TEST DATA DOCUMENT | 94117-292014P1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
|
|