| OVERALL LENGTH | 3.287 INCHES |
| OVERALL WIDTH | 1.437 INCHES |
| LENGTH OF SHAFT FROM HOUSING | 0.337 INCHES SINGLE END |
| MOUNTING METHOD | CLAMP RING |
| MOUNTING FACILITY TYPE AND QUANTITY | 1 CLAMP COLLAR |
| INCLOSURE FEATURE | TOTALLY INCLOSED |
| INCLOSURE SPECIFICATION | COMMERCIAL |
| CURRENT TYPE | AC INPUT |
| CURRENT RATING IN AMPS | 0.220 SINGLE INPUT |
| CURRENT RATING METHOD | LOCKED ROTOR |
| FREQUENCY IN HERTZ | 400.0 INPUT |
| PHASE | SINGLE INPUT |
| CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | 115.0 LINE TO NEUTRAL SINGLE INPUT |
| TORQUE RATING AND TYPE | 1.45 INCH-OUNCES STALLED |
| TEMP RATING | -54.0 OPERATING DEG CELSIUS AND |
| 125.0 OPERATING DEG CELSIUS |
| COOLING METHOD | NATURAL CONVECTION VENTILATED |
| TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | 36.0 AC |
| CONTROL FIELD CURRENT RATING IN AMPS | 0.001 |
| CONTROL FIELD IMPEDANCE RATING IN OHMS | 102.0 |
| CONTROL FIELD WINDING TYPE | SINGLE WINDING W/CENTER TAP |
| ROTOR SPEED RATING IN RPM | 4500.0 SINGLE NO LOAD |
| SHAFT END CHARACTERISTIC | A17 SINGLE STYLE SINGLE END |
| SHAFT DIAMETER | 0.0786 INCHES NOMINAL SINGLE END |
| TEETH QUANTITY | 15 SINGLE END |
| FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND |
| HORIZONTAL MOUNTING POSITION |
| TEST DATA DOCUMENT | 10001-2245876 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |