| ACCURACY IN PERCENT | -2.0 TO 2.0 AT FULL SCALE SINGLE INDICATOR ALL RANGES |
| BACKGROUND COLOR | WHITE SINGLE INDICATOR ALL RANGES |
| CIRCUIT CURRENT FOR WHICH DESIGNED | DC |
| CIRCUIT ATTACHMENT METHOD AND QUANTITY | 2 SOLDER LUG AND 2 THREADED STUD |
| DIAL SCALE MARKING COLOR | BLACK AND GREEN SINGLE INDICATOR 2ND RANGE |
| DIAL SCALE MARKING COLOR | BLACK SINGLE INDICATOR 1ST RANGE |
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3000.0 |
| FURNISHED ITEMS AND QUANTITY | NUT 3; WASHER 3 |
| ENVIRONMENTAL PROTECTION | COLD RESISTANT AND HEAT RESISTANT AND SHOCK RESISTANT AND SUBMERSIBLE AND VIBRATION RESISTANT AND WATERTIGHT |
| FEATURES PROVIDED | LUMINOUS SCALE MARKING AND MAGNETIC SHIELD AND ZERO ADJUSTER |
| FSC APPLICATION DATA | TEST SET,ELECT. EQUIP. |
| INDICATOR TYPE | DIAL W/POINTER |
| INSTALLATION DESIGN | PANEL |
| OVERALL DIAMETER | 2.695 INCHES MAXIMUM |
| OVERALL LENGTH | 2.650 INCHES MAXIMUM |
| PANEL FOR WHICH DESIGNED | MAGNETIC OR NONMAGNETIC |
| MATERIAL | STEEL CORROSION RESISTING |
| METER BODY DIAMETER BEHIND MOUNTING FLANGE | 2.210 INCHES MAXIMUM |
| METER DEPTH BEHIND MOUNTING FLANGE | 1.475 INCHES NOMINAL |
| MOUNTING BOLT CIRCLE DIAMETER | 2.440 INCHES NOMINAL |
| MOUNTING ARRANGEMENT STYLE | THREE HOLE/STUD BOLT CIRCLE |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 SCREW AND 3 UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| MOVEMENT SUSPENSION METHOD | JEWEL PIVOT BASE |
| MOVEMENT TYPE | MOVING COIL, PERMANENT MAGNET |
| NUCLEAR HARDNESS CRITICAL FEATURE | NONHARDENED |
| POINTER COLOR | BLACK SINGLE INDICATOR ALL RANGES |
| SCALE DIVISION QUANTITY | 10 SINGLE INDICATOR 1ST RANGE |
| SCALE GRADUATION TYPE | LINEAR SINGLE INDICATOR 1ST RANGE |
| SCALE GRADUATION TYPE | NONLINEAR SINGLE INDICATOR 2ND RANGE |
| SCALE MARKING | TOP SCALE: -50,-40,-30,-20,-10,13325,10,20,30,40,50; BOT SCALE: L,MHZ,R |
| SENSITIVITY RATING | 100.0 MICROAMPERES |
| SPECIAL MARKINGS | GREEN BAND 46 TO 54 UA ON BOT SCALE |
| SPECIAL TEST FEATURES | CONFORMS TO MIL-M-10304/5,TYPE MR26W100DCUAR |
| SPECIAL FEATURES | RUGGEDIZED; TERMINAL POSITION FROM 0.510 IN. ABOVE CENTER LINE TO 0.260 IN BELOW CENTER LINE |
| STYLE DESIGNATOR | ROUND FLUSH MTG |
| SURFACE TREATMENT | ENAMEL SEMIGLOSS |