9540-00-005-6392, BEAM,STRUCTURAL

National Stock Number:
9540-00-005-6392

Federal Supply Class:
9540

National Item Identification Number:
000056392

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

219122	01634	ALUMINUM CO OF AMERICA
22759	06012	TRANSTAR METALS CORP
AMS-QQ-A-200/13	0U583	SAE INTERNATIONAL
AMS-QQ-A-200/13	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
LS32349-1	98897	LOCKHEED MARTIN CORP
QQ-A-200/13	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	T SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.188 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.188 INCHES NOMINAL
FIRST TIP RADIUS	0.025 INCHES NOMINAL
FIRST TIP STYLE	LOWER RADIUS
HEAT TREATMENT	T-6511 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.500 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.280 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEG THICKNESS	0.120 INCHES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT	1.592 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/13 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7178
NONDEFINITIVE SPEC/STD DATA	7178 ALLOY AND T6511 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.500 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.280 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
WEIGHT PER UNIT MEASURE	1.214 POUNDS PER LINEAR FOOT
THIRD TIP INNER RADIUS	0.025 INCHES NOMINAL
THIRD TIP OUTER RADIUS	0.025 INCHES NOMINAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPS	NOT IDENTICAL
THIRD TIP STYLE	SQUARE W/ INNER AND OUTER CORNER RADII
TOP FLANGE WIDTH	3.000 INCHES NOMINAL

Click here to Register for Free 30-day Trial