9540-00-006-8467 ANGLE,STRUCTURAL Index 9540-00-006-8480 BEAM,STRUCTURAL

National Stock Number:
9540-00-006-8478

Federal Supply Class:
9540

National Item Identification Number:
000068478

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
19764501634ALUMINUM CO OF AMERICA
2293806012TRANSTAR METALS CORP
AMS-QQ-A-200/110U583SAE INTERNATIONAL
AMS-QQ-A-200/1181343SOCIETY OF AUTOMOTIVE ENGINEERS INC
AMS44760U583SAE INTERNATIONAL
LS33840-198897LOCKHEED MARTIN CORP
QQ-A-200/1181348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.062 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.062 INCHES NOMINAL
FIRST TIP STYLESQUARE END
HEAT TREATMENTO-ANNEALED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.000 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.050 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LEG THICKNESS0.050 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT1.410 INCHES NOMINAL
MATERIALALUMINUM ALLOY AMS4476, ALLOY 7075
NONDEFINITIVE SPEC/STD DATA7075 ALLOY AND O TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.000 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.050 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
WEIGHT PER UNIT MEASURE0.204 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH2.000 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us