9540-00-008-2215, BEAM,STRUCTURAL

National Stock Number:
9540-00-008-2215

Federal Supply Class:
9540

National Item Identification Number:
000082215

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

AMS-QQA200-3	0U583	SAE INTERNATIONAL
AMS-QQA200-3	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
AND10138-1004	99237	AIRFORCE-NAVY AERONAUTICAL DESIGN STANDARD
LS10138-1004-2	98897	LOCKHEED MARTIN CORP
QQA200-3	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	Z SHAPE
BOTTOM FLANGE WIDTH	0.750 INCHES NOMINAL
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FIRST TIP RADIUS	0.063 INCHES NOMINAL
FIRST TIP STYLE	LOWER RADIUS
HEAT TREATMENT	T-3511 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE THICKNESS	0.063 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT	1.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/3 FED SPEC 1ST MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 2024
NONDEFINITIVE SPEC/STD DATA	T3511 TEMPER
RIGHT BOTTOM INSIDE ANGLE	90.0 DEGREES NOMINAL
RIGHT SIDE BOTTOM FLANGE THICKNESS	0.063 INCHES NOMINAL
SECOND TIP RADIUS	0.063 INCHES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	NOT IDENTICAL
SECOND TIP STYLE	UPPER RADIUS
WEB FLANGE THICKNESS	0.063 INCHES NOMINAL
WEIGHT PER UNIT MEASURE	0.186 POUNDS PER LINEAR FOOT
TOP FLANGE WIDTH	0.750 INCHES NOMINAL

Click here to Register for Free 30-day Trial