9540-01-363-3403 BEAM,STRUCTURAL Index 5985-01-363-3405 SWITCH,RADIO FREQUENCY TRANSMISS

National Stock Number:
9540-01-363-3404

Federal Supply Class:
9540

National Item Identification Number:
013633404

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
1MT360B01-1006976301THE BOEING COMPANY


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.188 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.188 INCHES NOMINAL
FIRST TIP INNER RADIUS0.090 INCHES NOMINAL
FIRST TIP OUTER RADIUS0.090 INCHES NOMINAL
FIRST TIP STYLESQUARE W/ INNER AND OUTER CORNER RADII
HEAT TREATMENTANNEALED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.509 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.330 INCHES NOMINAL
LEFT TOP INSIDE ANGLE93.6000 DEGREES NOMINAL
LEG THICKNESS0.300 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT2.010 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMNS-1202-76301 MFR REF SINGLE MATERIAL RESPONSE
MATERIALTITANIUM ALLOY
NONDEFINITIVE SPEC/STD DATA6AL-4V-2SN COMPOSITION AND ANNEALED CONDITION
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.611 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.330 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE86.4000 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
SPECIFICATION/STANDARD DATA76301-1MT360 MANUFACTURERS STANDARD
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH3.120 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us