4810-01-452-7024 VALVE,SOLENOID Index 2530-01-452-7026 WHEEL SEGMENT,PNEUMATIC TIRE

National Stock Number:
9540-01-452-7025

Federal Supply Class:
9540

National Item Identification Number:
014527025

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
CVC10010-1018GA80378TRIUMPH AEROSTRUCTURES, LLC
MIL-T-8155681349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.190 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.190 INCHES NOMINAL
FIRST TIP INNER RADIUS0.062 INCHES NOMINAL
FIRST TIP OUTER RADIUS0.062 INCHES NOMINAL
FIRST TIP STYLESQUARE W/ INNER AND OUTER CORNER RADII
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES2.225 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.420 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LEG THICKNESS0.420 INCHES NOMINAL
OVERALL HEIGHT1.300 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-T-81556, COMP AB-1 MIL SPEC SINGLE MATERIAL RESPONSE
MATERIALTITANIUM ALLOY
NONDEFINITIVE SPEC/STD DATA6AL-4V COMPOSITION AND ANNEALED CONDITION
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES2.225 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.420 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH4.450 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us