9540-01-454-1840, BEAM,STRUCTURAL

8110-01-454-1841 DRUM,SHIPPING AND STORAGE

National Stock Number:
9540-01-454-1840

Federal Supply Class:
9540

National Item Identification Number:
014541840

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.

Manufacturer Information:

01AA150D060122	1W025	NORTHROP GRUMMAN SYSTEMS CORP
AMS-QQ-A-200/15	0U583	SAE INTERNATIONAL
AMS-QQ-A-200/15	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-200/15	81348	FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC

Techincal Specification:

BASIC SHAPE STYLE	T SHAPE
FABRICATION METHOD	EXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.125 INCHES NOMINAL
FIRST TIP STYLE	SQUARE END
HEAT TREATMENT	T-76511 SOLUTION HEAT TREATED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.488 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS	0.100 INCHES NOMINAL
LEFT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
LEG THICKNESS	0.125 INCHES NOMINAL
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT	5.000 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/15 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 7075
NONDEFINITIVE SPEC/STD DATA	7075 ALLOY AND T76511 TEMPER
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	1.512 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS	0.100 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE	90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIP	IDENTICAL
SPECIAL FEATURES	SHAPE IS "T" WITH A FLANGE ON BOTTOM 0.200 IN. THICK AND 2.000 IN. WIDE
TOP FLANGE WIDTH	3.000 INCHES NOMINAL

Click here to Register for Free 30-day Trial