9540-01-459-4678 ANGLE,STRUCTURAL Index 5998-01-459-4680 CIRCUIT CARD ASSEMBLY

National Stock Number:
9540-01-459-4679

Federal Supply Class:
9540

National Item Identification Number:
014594679

Description:
BEAM,STRUCTURAL

Detail:
A STRUCTURAL SHAPE FABRICATED FROM A FERROUS OR NONFERROUS MATERIAL AND RESEMBLES THE FOLLOWING CROSS-SECTIONAL FORMS: FOR THE LETTER H, BOTH FLANGES OF THE H SECTION ARE EQUAL OR LONGER THAN THE WIDTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTER I, A 16 2/3 PERCENT SLOPE ON THE INSIDE FACE OF THE FERROUS TYPE FLANGE, EITHER ONE OR BOTH OF THE NONFERROUS TYPE FLANGES ARE SHORTER THAN THE LENGTH MEASURED ALONG THE AXIS OF THE WEB; FOR THE LETTERS T AND Z, ON NONFERROUS TYPE, THE WEB IS USUALLY AT RIGHT ANGLES TO THE FLANGES. LETTER H SECTION MAY HAVE A MAXIMUM OF 5 PERCENT SLOPE ON THE INSIDE FACE OF THE FLANGES.


Manufacturer Information:
1MA160B01-1018776301THE BOEING COMPANY
60-593629321TRANSTAR METALS CORP
AMS-QQ-A-200/30U583SAE INTERNATIONAL
AMS-QQ-A-200/381343SOCIETY OF AUTOMOTIVE ENGINEERS INC
QQ-A-200/381348FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC


Techincal Specification:
BASIC SHAPE STYLET SHAPE
FABRICATION METHODEXTRUDED
FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG0.125 INCHES NOMINAL
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG0.095 INCHES NOMINAL
FIRST TIP STYLESQUARE END
HEAT TREATMENTO-ANNEALED
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES1.843 INCHES NOMINAL
LEFT SIDE TOP FLANGE THICKNESS0.095 INCHES NOMINAL
LEFT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
LEG THICKNESS0.095 INCHES NOMINAL
LENGTH10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM
OVERALL HEIGHT1.400 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
MATERIALALUMINUM ALLOY 2024
NONDEFINITIVE SPEC/STD DATA2024 ALLOY AND ANNEALED CONDITION
RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES2.257 INCHES NOMINAL
RIGHT SIDE TOP FLANGE THICKNESS0.095 INCHES NOMINAL
RIGHT TOP INSIDE ANGLE90.0 DEGREES NOMINAL
SECOND TIP RELATIONSHIP TO FIRST TIPIDENTICAL
WEIGHT PER UNIT MEASURE0.624 POUNDS PER LINEAR FOOT
THIRD TIP RELATIONSHIP TO PRECEDING TIPSIDENTICAL W/FIRST TIP
TOP FLANGE WIDTH4.100 INCHES NOMINAL


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us