|
|
|
National Stock Number:
3040-01-370-5454
Federal Supply Class:
3040
National Item Identification Number:
013705454
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| Z440237 FN 7 | 58861 | FEDERAL EQUIPMENT COMPANY DBA USE CAGE CODE 60587 FOR CATALOGING | | Z440237 FN 7 | 60587 | FEDERAL EQUIPMENT CO | | Z730129 | 58861 | FEDERAL EQUIPMENT COMPANY DBA USE CAGE CODE 60587 FOR CATALOGING | | Z730129 | 60587 | FEDERAL EQUIPMENT CO |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 1.4360 INCHES MINIMUM AND 1.4370 INCHES MAXIMUM | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 1.436 INCHES MINIMUM AND 1.437 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 47.750 INCHES NOMINAL | | SECOND END DIAMETER | 1.2490 INCHES MINIMUM AND 1.2500 INCHES MAXIMUM | | SECOND END DISTANCE FROM END TO GROOVE | 0.1690 INCHES NOMINAL | | SECOND END GROOVE DIAMETER | 1.1980 INCHES MINIMUM AND 1.2060 INCHES MAXIMUM | | SECOND END GROOVE WIDTH | 0.0480 INCHES MINIMUM AND 0.0520 INCHES MAXIMUM | | SECOND END STYLE | CIRCULAR GROOVED | | SPECIAL FEATURES | PACS | | STEP QUANTITY | 4 |
|
|