|
|
|
National Stock Number:
3040-01-370-5455
Federal Supply Class:
3040
National Item Identification Number:
013705455
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| Z440237 REV G FN 1 | 58861 | FEDERAL EQUIPMENT COMPANY DBA USE CAGE CODE 60587 FOR CATALOGING | | Z440237 REV G FN 1 | 60587 | FEDERAL EQUIPMENT CO | | Z740155 | 58861 | FEDERAL EQUIPMENT COMPANY DBA USE CAGE CODE 60587 FOR CATALOGING | | Z740155 | 60587 | FEDERAL EQUIPMENT CO | | Z740155 REV A | 58861 | FEDERAL EQUIPMENT COMPANY DBA USE CAGE CODE 60587 FOR CATALOGING | | Z740155 REV A | 60587 | FEDERAL EQUIPMENT CO |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.2190 INCHES MAXIMUM | | FIRST END EXTERNAL KEYWAY LENGTH | 2.8450 INCHES NOMINAL | | FIRST END DIAMETER | 1.7510 INCHES MAXIMUM | | FIRST END KEYWAY DEPTH | 0.2080 INCHES NOMINAL | | FIRST END KEYWAY WIDTH | 0.3750 INCHES MAXIMUM | | FIRST END GROOVE DIAMETER | 1.6960 INCHES MAXIMUM | | FIRST END GROOVE WIDTH | 0.0600 INCHES MAXIMUM | | FIRST END STYLE | CIRCULAR GROOVED AND FLAT KEYWAY | | LARGEST STEP DIAMETER | 2.2500 INCHES MAXIMUM | | MATERIAL | STEEL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 13.6250 INCHES MAXIMUM | | SECOND END DIAMETER | 1.7510 INCHES MAXIMUM | | SECOND END INTERNAL THREAD LENGTH | 0.7500 INCHES NOMINAL | | SECOND END KEYWAY DEPTH | 0.2080 INCHES NOMINAL | | SECOND END KEYWAY WIDTH | 0.3750 INCHES MAXIMUM | | SECOND END EXTERNAL KEYWAY LENGTH | 2.8450 INCHES MAXIMUM | | SECOND END STYLE | FLAT KEYWAYS AND INTERNALLY THREADED | | SPECIAL FEATURES | SECOND END HAS TWO HOLES;THIRD KEYWAY POSITIONED CENTER OF SHAFT | | STEP QUANTITY | 7 |
|
|