| DISTANCE FROM SPINDLE CENTER TO COLUMN | 10.250 INCHES NOMINAL |
| ACCESSORY COMPONENTS AND QUANTITY | BELT AND PULLEY GUARD 1,BELT AND MOTOR PULLEY (7/8 IN. BORE) 1,SELF-LOCKING DEPTH STOP 1,DEPTH GAGE 1,MOTOR 1 CONTROLS 1,TABLE RAISING MECHANISM 1,SAFETY COLLAR FOR HEAD 1 |
| BASE WORKING SURFACE AREA | 219.000 SQUARE INCHES |
| BASE WORKING SURFACE LENGTH | 16.250 INCHES NOMINAL |
| BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BASE WORKING SURFACE WIDTH | 13.500 INCHES NOMINAL |
| BASE WORKING SURFACE TYPE | TEE SLOTTED |
| COLUMN TYPE | ROUND |
| CURRENT TYPE | AC |
| FEED TYPE | HAND |
| FREQUENCY IN HERTZ | 60.0 |
| HEAD TYPE | FIXED |
| MAIN DRIVE TYPE | ELECTRIC MOTOR |
| MOUNTING TYPE | FLOOR |
| SPECIAL FEATURES | 24 VOLT PUSH BUTTON STATION,MAGNETIC STARTER,TRANSFORMER AND OVERLOAD PROTECTION (LVC). SLOTS AND SIDE LEDGES ON MODERN TABLE DESIGN MAKE CLAMPING OF WORK EASY.MACHINED FRONT APRON HAS MOUNTING HOLES. GROUND INDEX PIN ACCURATELY LOCATES TABLE AT THE LEVEL POSITION,AND AT 90 DEGREE LEFT TILT OR 90 DEGREE RIGHT TILT POSITIONS. STEEL GUARD ON DELTA 17 IN. STEP PULLEY DRILL PRESSES SWINGS UP HIGH AND BACK,WHILE THREE SPECIALLY DESIGNED SUPPORTS AND A STOP HOLD GUARD IN DESIRED "UP" POSITION. WITH ALL INTERFERENCE PRACTICALLY ELIMINATED,OPERATOR MAKES BELT AND SPEED CHANGES QUICKLY. BUILT-IN CLIPS AUTOMATICALLY LOCK GUARD IN PLACE WHEN CLOSED. |
| PHASE | THREE |
| SPINDLE QUANTITY | 1 |
| SPINDLE SOCKET TAPER SIZE | 2 MORSE |
| SPINDLE SPEED QUANTITY | 5 |
| SPINDLE SPEED RANGE IN RPM | +700.0 TO 4250.0 |
| SPINDLE TRAVEL DISTANCE | 5.000 INCHES NOMINAL |
| SPINDLE TYPE | TAPERED SOCKET |
| UPPER WORKING SURFACE AREA | 154.000 SQUARE INCHES |
| UPPER WORKING SURFACE SHAPE | RECTANGULAR |
| UPPER WORKING SURFACE LENGTH | 14.000 INCHES NOMINAL |
| UPPER WORKING SURFACE VERTICAL ADJUSTMENT | 34.750 INCHES NOMINAL |
| UPPER WORKING SURFACE WIDTH | 11.000 INCHES NOMINAL |
| UPPER WORKING SURFACE TYPE | SLOTTED W/CENTER HOLE |
| VOLTAGE IN VOLTS | 115.0 OR 230.0 |