| DISTANCE FROM SPINDLE CENTER TO COLUMN | 11.875 INCHES NOMINAL |
| ACCESSORY COMPONENTS AND QUANTITY | RAISING MECHANISM FOR HEAD OR TABLE 1,SELF-LOCKING DEPTH STOP 1,DEPTH GAGE 1,BELT GUARD 1,BELT AND MOTOR PULLEY (SPECIFY BORE) 1,SAFETY COLLAR FOR HEAD 1,MOTOR 1,CONTROLS 1 |
| BASE WORKING SURFACE AREA | 219.000 SQUARE INCHES |
| BASE WORKING SURFACE LENGTH | 16.250 INCHES NOMINAL |
| BASE WORKING SURFACE TYPE | TEE SLOTTED |
| BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BASE WORKING SURFACE WIDTH | 13.500 INCHES NOMINAL |
| COLUMN TYPE | ROUND |
| CURRENT TYPE | AC |
| FEED TYPE | HAND |
| FREQUENCY IN HERTZ | 60.0 |
| HEAD TYPE | FIXED |
| MAIN DRIVE TYPE | ELECTRIC MOTOR |
| MOUNTING TYPE | FLOOR |
| SPECIAL FEATURES | 24 VOLT PUSH BUTTON STATION,MAGNETIC STARTER,TRANSFORMER AND 3-LEG OVERLOAD PROTECTION (LVC),MEIGHT BALL BEARINGS REGIDLY SUPPORT SPINDLE ON SPEED REDUCTION MODELS. TEN-SPLINE SPINDLE IS 3/4 IN. IN DIAMETER FOR GREATER TORQUE TRANSMISSION. LARGE 2 3/8 IN. DIAMETER QUILL IS SUPPORTED BY THREE PRECISION BORED LANDS IN HEAD,PROVIDING EXTRA SMOOTH TRAVEL. LONG COLUMNS PROVIDE EXTRA BIG CAPACITY FOR LARGE WORK. |
| PHASE | THREE |
| SPINDLE QUANTITY | 1 |
| SPINDLE SOCKET TAPER SIZE | 3 MORSE |
| SPINDLE SPEED QUANTITY | 8 |
| SPINDLE SPEED RANGE IN RPM | +125.0 TO 1400.0 |
| SPINDLE TYPE | TAPERED SOCKET |
| SPINDLE TRAVEL DISTANCE | 6.000 INCHES NOMINAL |
| UPPER WORKING SURFACE AREA | 288.000 SQUARE INCHES |
| UPPER WORKING SURFACE SHAPE | RECTANGULAR |
| UPPER WORKING SURFACE TYPE | SLOTTED W/CENTER HOLE |
| UPPER WORKING SURFACE LENGTH | 18.000 INCHES NOMINAL |
| UPPER WORKING SURFACE VERTICAL ADJUSTMENT | 34.250 INCHES NOMINAL |
| UPPER WORKING SURFACE WIDTH | 16.000 INCHES NOMINAL |
| VOLTAGE IN VOLTS | 230.0 OR 460.0 |