|
|
|
National Stock Number:
5306-01-449-5410
Federal Supply Class:
5306
National Item Identification Number:
014495410
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| BACB30NE5D19 | 06710 | VALLEY-TODECO, INC. | | BACB30NE5D19 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30NE5D19 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30NE5D19 | 17446 | HUCK INTERNATIONAL, INC | | BACB30NE5D19 | 17943 | FEDERAL MANUFACTURING CORP | | BACB30NE5D19 | 1RC86 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BACB30NE5D19 | 27624 | SPS TECHNOLOGIES LLC | | BACB30NE5D19 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30NE5D19 | 80539 | SPS TECHNOLOGIES, LLC | | BACB30NE5D19 | 82918 | THE BOEING COMPANY | | BACB30NE5D19 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.062 INCHES NOMINAL FASTENER | | FASTENER LENGTH | 1.641 INCHES MINIMUM AND 1.671 INCHES MAXIMUM | | GRIP DIAMETER | 0.3110 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM | | GRIP LENGTH | 1.177 INCHES MINIMUM AND 1.977 INCHES MAXIMUM | | HEAD HEIGHT | 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM | | HEAD STYLE | DISHED HEXAGON | | MATERIAL | STEEL COMP 4340 OVERALL | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | SHANK UNTHREADED HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FASTENER | | WIDTH BETWEEN FLATS | 0.300 INCHES MINIMUM AND 0.310 INCHES MAXIMUM | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.469 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|