|
|
|
National Stock Number:
5306-01-449-5411
Federal Supply Class:
5306
National Item Identification Number:
014495411
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| BACB30NE5H11 | 06725 | SPS TECHNOLOGIES, LLC | | BACB30NE5H11 | 17446 | HUCK INTERNATIONAL, INC | | BACB30NE5H11 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30NE5H11 | 80539 | SPS TECHNOLOGIES, LLC | | BACB30NE5H11 | 82918 | THE BOEING COMPANY | | BACB30NE5H11 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| FASTENER LENGTH | 1.017 INCHES MINIMUM AND 1.047 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM | | GRIP LENGTH | 0.677 INCHES MINIMUM AND 0.697 INCHES MAXIMUM | | HEAD HEIGHT | 0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM | | HEAD STYLE | DISHED HEXAGON | | HOLE CONFIGURATION STYLE | HEXAGON CORNERS | | HOLE DIAMETER | 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM | | HOLE QUANTITY | 3 | | HOLE TYPE | DRILLED | | MATERIAL | STEEL COMP 4340 OVERALL | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | WIDTH BETWEEN FLATS | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM | | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.345 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNJF |
|
|